Download Files:
Download Odin3-v1.85 + CWM recovery for Samsung Galaxy Ace Plus S7500.Download Rooting Package for Samsung Galaxy Ace Plus S7500.
Pre-Requisites:
- Rooting will void your device warranty. But don’t worry it can be easily regained back by un-rooting the device.
- Backup is the most essential & important step before flashing anything on your device. As disaster can knock your door without knowing you, its better to take this major steps right now. So backup all your data including Contacts, SMS/MMS, call logs, notes, APN settings and copy it somewhere for safety. Also in the last step of this procedure we need to wipe all the data present onto your phones memory.
- Make sure that the battery of your device is charged at least upto 70% so as to minimize the risk of switching off during the installation process.
- Make sure that the Mobile specific drivers are installed on your Computer. You can install them by installing Samsung Kies or manually install them from the link given below:
- Enable the USB Debugging mode on your device by following the path Menu->Settings->Applications->Development->USB Debugging.
Procedure to install Clockworkmod recovery on Galaxy Ace Plus S7500:
Step 1: After downloading the Odin3-v1.85 + Clockworkmod recovery file, extract it on your PC. The Odin that you’ve just downloaded is an essential tool & is must for installing Clockworkmod recovery on any Android device. We remind our users that this tool is an illegal way & is not officially released by Samsung. Even though it will not cause any damage to your device unless you follow the instructions properly.Step 2: Switch off your Ace Plus completely and boot it in downloading mode.
Step 3: For Ace Plus, downloading mode can be entered by pressing & holding Home button + Volume Down key + Power button simultaneously until you see a warning message
Step 4: Press Volume Up key to continue. This will land you into downloading mode.
Step 5: Now you need to flash the Clockworkmod recovery on your device. Keeping your phone in download mode, connect it to PC via USB cable.
Step 6: Launch the Odin Multi Downloader3-v1.85 that you’ve downloaded earlier. You’ll see that an ‘Added’ message appears on the Odin window. Also the ID:COM section will turn yellow with a random COM PORT number below it. If it’s not showing, then check whether you have properly installed those device drivers on your PC or not (As mentioned in pre-requisites).
Step 7: Tick the Auto Reboot and F.Reset Time option on the Odin. Do not tick or un-tick anything else.
Step 8: On the Odin window, click on PDA tab and locate the ‘clockworkmod-5.0.2.8.tar.md5’ recovery file which you have downloaded before & select it.
Step 9: After completing everything as mentioned above, simply press the Start button located on the Odin window to execute the Clockworkmod flashing process. Your phone will automatically reboot itself while going through the process. It is recommended not to touch or remove the USB cable until the process completes.
Step 10: Wait until the Clockworkmod flashing process completes. It will hardly take 5 minutes to complete. As soon as it completes, you’ll see the ID:COM section on the Odin window is turned green with the message ‘Pass’ below it. Now you can safely remove the USB cable.
Note: Unfortunately due to some reason phone if the process fails or if Odin gets stuck or in case your device gets boot loops, then don’t panic. Just close the Odin window, remove and re-insert the battery from your device. Again go into downloading mode and repeat the whole procedure as given above.
Step 11: As all the flashing processes are completed now, let’s see whether the Clockworkmod recovery is properly installed or not. For that, firstly switch off your Galaxy Ace Plus.
Step 12: Now boot into recovery mode. For Ace Plus, recovery mode can be entered by pressing & holding Volume Up key + Volume Down key + Home button (Middle button) + Power button simultaneously until you land into recovery mode. You’ll notice that Clockworkmod Custom recovery is properly installed on your device.
That’s it! You’ve successfully installed Clockworkmod Custom recovery on your Samsung Galaxy Ace Plus GT-S7500. Now you can install Custom ROMs, take nandroid backup, wipe data/cache and much more.
Procedure to Root Samsung Galaxy Ace Plus S7500:
Method 1:
Step 1: Now its time to root your Galaxy Ace Plus. So firstly switch off your device completely.Step 2: You need to enter into Clockworkmod recovery mode now. Recovery mode can be entered by pressing & holding Volume Up key + Volume Down key + Home button (Middle button) + Power button simultaneously until the recovery mode appears.
Step 3: As soon as the Recovery Mode appears press Menu Button to grey out the screen. Keep your device in Recovery Mode as we will require it for rooting.
Step 4: On PC, download and extract the Rooting Package in a specific folder from the link given above. After extracting you’ll find ‘runme.bat’ file in extracted folder.
Step 5: Keeping the phone in recovery mode connect it to PC using the USB cable.
Step 6: Run the runme.bat file to begin the rooting process. This will take a minute to complete.
Step 7: As soon as the process completes, restart your Ace Plus. This will root your device.
Note: If this method doesn’t work for you then try Method 2 given below.
Method 2:
Step 1: Download this SuperSU-ROOT-S7500 package file on your PC.Step 2: Connect your Galaxy Ace Plus to PC, enable USB debugging mode and transfer that downloaded rooting package on your device external SD card.
Step 3: You need to enter into Clockworkmod recovery mode now. So switch off your mobile first. Then press and hold Volume Up key + Volume Down key + Home button (Middle button) + Power button simultaneously to enter into recovery mode.
Step 4: Navigate to the ‘install zip from SD card‘ option present on the recovery itself and select it. On the next screen, select ‘choose from SD card‘ option. This will show all the data present on your SD card.
Step 5: Now navigate to the SuperSU-ROOT-S7500 rooting package which you’ve just downloaded and select it. On the next screen select Yes option to initiate the rooting process.
Step 6: As soon as the process gets over, restart your Ace Plus by selecting ‘reboot system now’ option.
Your Galaxy Ace Plus S7500 has been rooted now. You can verify the same by going to your Apps list & check whether an app named Superuser is installed on your device or not. This Superuser app helps to supervise each application which requires a root access.
For installing Android 2.3.6 Gingerbread DDMF2 official firmware on your Ace Plus you may refer our article:
0 Response to "How to root the Samsung Galaxy Ace Plus S7500"
Post a Comment